My Basket (0)

Recently added item(s)×

You have no items in your shopping cart.

Recently added item(s)×

You have no items in your shopping cart.

Industrial PVC Gutter Installation Guide

• Fascia brackets must be used within 150mm of any gutter fitting.

• Use all fixing positions on all unions, angles and outlets for all systems.

• It is best practice to make use of all available fixing holes for gutter brackets, using the spacings as shown below. Ensure the fixings are long enough to penetrate the rear face of the board. If the cellular PVC fascia board is less than 16mm thick, install a backing board to accept gutter bracket fixings.The gutter should be fitted as high as possible but not such that the outer edge projects above the line of the roof.

• For all gutters, the tile overhang from the fascia board should not be more than 50mm.

• Where over fascia ventilation is used, it may be necessary to use a gutter spacer and height adjuster bracket in conjunction with fascia brackets to ensure the gutter is fitted in the optimum position.

Gutter Type     Max distance between brackets
Industrial Super Deep 170mm  600mm

 

 

 

 

For detailed information on specification and flow rates click here.