100mm Steel Round Downpipe 120 Degree Offset Bend Black

100mm Black Prelaq Steel 120 degree Downpipe bend.

• Can be used to bring pipe from the outlet closer to the wall with a small length of pipe between
• Also  useful to change the direction of water drainage around obstacles
• 2 bends required to make up a swan-neck
• At the top end of the bend the diameter is 100mm so requires a spigot end (male end) of downpipe or 1m pipe which is 98mm diameter to insert into it.
• The bottom of the downpipe bend is spigoted (male end) with diameter of 98mm so will insert directly into a piece of plain end 3m long or 1m long downpipe

Dimensions (see drawing):

• Dim A – 100mm
• Dim B – 98mm
• Dim C – 60degree
• Dim D – 50mm